*Special Order Structural Packages

*Stainless Steel

*Heavy Wall Carbon Steel & Alloy *Tubing
*Forgings

*Seamless Carbon Steel Pipe

*Fiberglass & Plastic Products
*Steel Plate Fabrication – Rolling & *Bending
*Aluminum
*Bucket & Truck Liner Packages
*Grip Strut® & Bar Grating
*Flame & Plasma Cut Parts

 

Steel Plate IN STOCK
A36 3/16”-6”
 A572 GR50 1/2”-3”
A633 GRC/API 2H50 3/4” – 4”
 A514 (T-1) 1/4” – 6”
AR400 1/4” – 2”
AR500 3/16” – 2”

QT-PLUS 1/4” – 4”

CHROME CARBIDE OVERLAY 1/4” ON 1/4” - 1/2” ON 1/2”

 

 

(*All material provided is intended for informational purposes only and should not be used to replace official documents or the advice of a professional.)


A36 – 3/16” - 6”   -  Click here for information in PDF format.
A36 is one of the most widely used grades of steel plate.  It is used in practically every industry and its applications cover structural shapes, bars, and plate to be used for general structural purposes.

 

THICKNESS

CHEMISTRY
  C Mn P S Si
3/16" thru 3/4" 0.25 * 0.04 0.5 0.4
> 3/4" thru 1-1/2" 0.25 .80/1.20 0.04 0.5 0.4
> 1-1/2" thru 2-1/2" 0.26 .80/1.20 0.04 0.5 .15/.40
> 2-1/2" thru 4" 0.27 .85/1.20 0.04 0.5 .15/.40
> 4" thru 24" 0.28 .85/1.20 0.04 0.5 .15/.40

 

MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YEILD KSI % ELONG. MIN  
8" 2"
Thru 8" 58 to 80 36 YP Min 18 21
>8" thru 24" 58 to 80 32 YP Min 18 21

 

 

A572 GR50 1/2” - 3”   -  Click here for information in PDF format.

A572 is a high strength low alloy steel plate used in a variety of structural applications which covers structural shapes, bars, sheet piling, and plate to be used for construction of bridges, buildings, and other structures.

 

THICKNESS CHEMISTRY
  C Mn P S Si
3/16" thru 1-1/2" 0.23 1.35 0.04 0.05 0.4
> 1-1/2" thru 4" 0.23 1.35 0.04 0.05 .15/.40
> 4" thru 6" 0.21 1.35 0.04 0.05 .15/.40

 

MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YIELD KSI % ELONG. MIN  
8" 2"
Thru 4" 65 Min 50 Min 16 19
>4" thru 6" 60 Min 42 Min 18 22

 


A633 GRC/API 2H50 – 3/4” - 4”   -  Click here for information in PDF format.
A633 specification covers normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures.
Typical applications included, but are not limited to utility pole base plates, booms, crawler frames, electric shovel dipper handles, and suspension components.

 

CHEMISTRY
GRADE C Mn P S Si V Fe
API 3/16" thru
2H50 1-1/2"		 <=0.220% 1.15/1.50% <=.035% <=.040% 0.15/.50% 0.40/.11% >=97.595%

 

MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YIELD KSI % ELONG. MIN  
8" 2"
2" thru 4" 80/100 60 Min 16 21


 

A514 (T-1) – 1/4” - 6”   -  Click here for information in PDF format.
The low carbon content of this grade allows it to be used in welded structures; suitable welding procedures for the grade and intended use are required.
ASTM A514 Grade B is a quenched and tempered steel product offered for structural applications where high yield strength (100 ksi min.) combined with good formability and toughness are required. This grade is ideal for applications where increased strength-to-weight ratios and uniformity of properties are required.

 

CHEMISTRY
Grade   C Mn P S Si Cr Ni Mo V B Other
B to 1-1/4" .12/.21 .70/1.00 0.35 0.35 .20/.35 .45/.65 - .15/.25 .03/.08 .0005/.005 Ti.01/.03
H >1-1/4" to 2" .12/.21 .95/1.30 0.35 0.35 .20/.35 .40/.65 .30/.70 .20/.30 .03/.08 .0005/.005 -
F >2 to 2-12" .10/.20 .60/1.00 0.35 0.35 .15/.35 .40/.65 .70/1.00 .40/.60 .03/.08 .005/.005 Cu .15/.5
G >2-12" to 6" .14/.21 .95/1.30 0.35 0.35 .15/.35 100/1.50 1.20/1.50 .40/.60 0.03/.08 - -

 

MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YIELD KSI % ELONG. MIN  
8" 2"
Thru 3/4" 110/130 100 Min - 18
>3/4" thru 2-1/2" 110/130 100 Min - 18
>2-1/2" thru 6" 100/130 90  Min - 16


 

AR400 - 1/4” - 2”   -  Click here for information in PDF format.
AR400F is a through-hardened abrasion-resistant product with a nominal hardness level of 400 HBW. This product is ideal for applications where a good combination of abrasion resistance, formability, and weldability is desired. AR400F is produced by austenitizing, water quenching, and tempering.

 

CHEMISTRY
  C Mn P S Si Cr Ti Mo V B
1/4" -2" .20 max 1.60 max .030 max .030 max .55 max .40 max .005/0.20 * * .004 max
 
MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YIELD KSI % ELONG. MIN  
8" 2"
thru 3/4" 1246 1083 - 20.8
>3/4" thru 2" * * * *

 

 

AR500 – 3/16” - 2”   -  Click here for information in PDF format.
AR500, with its high Brinell Hardness (BHN) rating, is particularly suited for mining equipment, earth moving equipment, ore and aggregate processing, road building equipment manufacturing and fabrication industries, rifle range silhouette targets, target backstops and bullet trap applications.

 

CHEMISTRY
  C Mn P S Si Cr Ti Mo V B
1/4" -2" .35 max 160 max .030 max .030 max .55 max .80 max .020 Max * * .004 max
 
MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YIELD KSI % ELONG. MIN  
8" 2"
thru 3/4" 1449 1297 - 17.9
>3/4" thru 2" * * * *


 

 

QT-PLUS – 1/4” - 4”   -  Click here for information in PDF format.
The properties of QT-PLUS are the result of a specific chemistry combined with a unique thermal heat treating process. This produces a premium quality steel unmatched in the industry with up to 10 times the wear life. Even at maximum hardness, parts manufactured from QT-PLUS remain amazingly ductile.

 

CHEMISTRY
C Mn Ph S Si Cr Ni Mo B
.24/.26 max 1 .035 max .005 max .55 max 0.5 1 0.25 .003 max

 

(Average chemistry for all thicknesses)

 

PHYSICAL/MECHANICAL PROPERTIES
HARDNESS < 1" 461/537 bhn  
HARDNESS > 1" 444/514 bhn  
TENSILE   225,000 psi typical
ELONGATION 2" 11% typical
CHARPY V 25 ft./lbs. at 40 degrees F typical
YIELD   165,000 typical

 

CHROME CARBIDE OVERLAY -  Click here for information in PDF format.

Your extreme wear plate needs.
AVAILABLE IN:
1/4” ON 1/4”, 3/8” ON 3/8” & 1/2” ON 1/2”
High Chromium Iron (Hypo Eutectic) an alloy overlay with high abrasion resistance suited to low stress applications with moderate to high impact conditions. Used in extreme wear situations; such as dragline buckets and shovel buckets.

 

CHEMISTRY
THICKNESS C Mn Cr Others Fe HRC
3/16" thru 1-1/2" 4.5 3.5 34 1.3 Remainder 55-60

 

MECHANICAL PROPERTIES
THICKNESS TENSILE KSI YIELD KSI % ELONG. MIN  
8" 2"
thru 3/4" 1449 1297 - 17.9
>3/4" thru 2" * * * *